Huawei PowerCube 5000 - Page 100

PowerCube 5000
User Manual (SmartLi 100Ah)
4 UI Description
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
92
First-Level Menu
Second-Level
Menu
Third-Level
Menu
Function
information.
Active Alarms
-
Views active alarms.
Mobile Data Info.
-
Views mobile data and NetEco connection
status.
Monitoring
Microgrid system
-
Views the running information about the
microgrid system, sets microgrid system
parameters, and starts or stops the system.
Power cabinet
HSU group
Views the running information about each
HSU.
Lihv Battery
Group
Views the running information about each
lithium battery cabinet, sets parameters for
the battery cabinets, synchronizes the
battery cabinet time, and deletes the devices
that have failed to communicate.
Bypass
Views the bypass module running
information and sets bypass parameters.
ECM1/2
Views the ECM running information and
sets the verification and commissioning
parameters for the ECM.
UIM
Views the UIM running information, sets
dry contact parameters for the UIM, and
clears dry contact alarm association
parameters.
MUS01C
Views the running information about the
monitoring interface module.
Setup parameter
Sets basic parameters and sensor parameters
required for site deployment.
DG comm. ex.
board
Views the running information about the
DG expansion module.
MDU
Resets the MDU.
Comm. ex. board
group
Views the NIM01C3 running information
and resets the NIM01C3.
Controller
-
Views the NetEco running information and
set NetEco parameters, and restarts the
SMU.
EPS-D group
-
Views the running information about each
diesel generator (DG) system and set DG
system parameters.
PV module
-
Views the running information about PV
modules and sets PV module parameters.