Huawei PowerCube 5000 - Preparing Cable Terminals

PowerCube 5000
User Manual (SmartLi 100Ah)
10 FAQ
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
145
10.2 Preparing Cable Terminals
Preparations
Tools: hydraulic pliers, heat gun, and crimping tool
Materials: heat shrink tubing, DT terminal, OT terminal, and cord end terminal
Documents: none
Skill requirement: common technician
Procedure
Step 1 The following figure shows how to prepare a DT terminal.
Figure 10-2 Preparing a DT terminal
(1) Cable
(2) Heat shrink tubing
(3) DT terminal
(4) Hydraulic pliers
(5) Heat gun
Step 2 The following figure shows how to prepare an OT terminal.