PowerCube 5000
User Manual (SmartLi 100Ah)
Copyright © Huawei Technologies Co., Ltd.
Battery
The battery provides DC voltage through the bidirectional DC-DC unit, and then the inverter
converts the DC voltage to the AC voltage output. In this case, the bidirectional DC-DC
works to provide charging energy for the internal busbar of the HSU.
Figure 2-4 Working mode of the batteries
DG
DG input supplies power to loads through the bypass module.
Figure 2-5 DG working mode 1
The DG input supplies power to loads through the bypass module, and charges the
battery through the reverse PFC and bidirectional DC-DC circuit.
To Next Page
Loading...
