Huawei PowerCube 5000 - Page 31

PowerCube 5000
User Manual (SmartLi 100Ah)
2 Products
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
23
Buttons
Table 2-6 Button description
Button
Name
Description
Up
Press Up and Down to scroll through the menus or to change the
value of a parameter.
Down
Cancel
Returns to the previous menu without saving the settings.
Enter

Enters the main menu from the standby screen.

Enters a submenu from the main menu.

Saves menu settings on a submenu.
NOTE

The LCD screen becomes dark if no button is pressed within 30 seconds.

You need to log in again if no button is pressed within 1 minute.

To increase or decrease a parameter value quickly, hold down or .

To restart the SMU, hold down and for 10 seconds.

To increase (or decrease) the LCD contrast ratio, hold down and (or ) for 2
seconds.
SD Card Slot
The SD card has a maximum of 32 GB memory.
USB Port
You can insert a USB flash drive into the USB port to upgrade software, set up a site rapidly,
and export configuration files and run logs.
Communications Ports
Table 2-7 Communications port description
Communications Port
Communications
Parameter
Communications Protocol
FE
10/100 M autonegotiation
HTTPS, NetEco protocol, SNMP,
and TCP-Modbus protocol
RS485/RS232
Baud rate: 1200 bit/s,
2400 bit/s, 4800 bit/s,
Master/slave protocol, YDN