Huawei PowerCube 5000 - Installing AC Input Power Cable

PowerCube 5000
User Manual (SmartLi 100Ah)
3 Installation
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
77

Ensure that the upstream AC input circuit breaker is OFF, and that the warning label "Do
not operate" is attached.

Switch off all circuit breakers before installing cables.
Procedure
Step 1 Prepare a cable of suitable length and install cord end terminals or OT terminals on both ends
of the cable.
Step 2 Install an AC input power cable.
Figure 3-26 Installing an AC input power cables for a DG
(1) DG