Huawei PowerCube 5000 - Page 98

PowerCube 5000
User Manual (SmartLi 100Ah)
4 UI Description
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
90
First-Level Menu
Second-Level
Menu
Third-Level
Menu
Function
batteries, and Cmp Maint.
System Info
Runn Info
AC Output
Views AC output data.
Local Load
Views local load data.
PV Input
Views PV input data.
Bypass Input
Views bypass data.
HSU Module Data
Views data about each HSU.
Lihv Battery
Group
Views data about each lithium battery
cabinet.
Total Runtime
Views the runtime of the ICC cabinet.
Environment Data
Views the environmental data of the ICC
cabinet.
Cmp Maint
Views component maintenance intervals.
Alarms
Active Alarms
Views the active alarms of the ICC cabinet.
Historical Alarms
Views the historical alarms of the ICC
cabinet.
Fault Clear
Clears alarms.
Buzzer On/Off
Enables or disables the buzzer.
Settings
Basic
Sets parameters such as the display
language, date, and user password.
Communication
Sets IP parameters for the ICC cabinet,
parallel cabinet, NetEco, and lithium battery
cabinet.
Basic Param
Sets basic parameters such as single/parallel,
voltage level, battery type, number of DGs,
number of HSUs configured in the cabinet,
and minimum system startup capacity
percentage.
Advanced Param
Sets zero display with no load output.
Dry Contacts
Sets alarm conditions for UIM dry contacts.
Setup Parameter
Sets the door status sensor, transformer
cabinet SPD, and the option to enable EPO.
AC Load
Sets load parameters.
Settings Wizard
Sets parameters upon first power-on.
Lihv Battery
Group
Sets lithium battery group parameters.
Clr Comm Fail
Clears devices that have failed to