A Flash Tools
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
40
Step 3 Run "Yafuflash.exe" in the command prompt.
Step 4 Use the settings as listed below.
Format:Yafu flash [OPTION] [MEDIUM] [FW_IMAGE_FILE] . See Table 3-2 and Table 3-3.
[OPTIONS]:
Table 3-2 Options Commands
Options Commands meanings
-info
This option displays information regarding
existing and new firmware.
-auto
This option allows for automatic upgrades by
comparing flash module headers.
-full This options allows for full upgrades
-force-boot
Select this option to force the boot loader to
be upgrade during full upgrade. The boot
loader is “preserved” by default.
-c
This option preserves configuration modules
during full upgrade.
[MEDIUM]:
Table 3-3 Medium Options
Medium Options meanings
-cd Select this option to use USB connections
-nw&ip
Select this option to use network with –ip
(followed by the IP address).
[FW_IMAGE_FILE]:
The firmware-image file name is [rom.ima].
----End
Examples
Using Network as a Medium
Example 1
User Guide
Issue 04 (2014-09-15)
RH2488 V2 BMC
To Next Page
Loading...
