Figure 2-1 Scanning a QR code
Step 2 Enable WiFi and GPS and disable mobile data on your phone.
Step 3 Press and hold the activate button on the front panel of the battery module for
0.5s to enable WiFi. If the WiFi indicator is on, WiFi is enabled successfully.
Step 4 Open the NetEco app on the mobile phone. The Select Application screen is
displayed.
Figure 2-2 Select Application
(1) Android or HarmonyOS
(2) iOS
Step 5 Tap SmartLi. The Connect WLAN screen is displayed. Use either of the following
methods to connect to the WiFi network.
SmartLi-ESM-24020P1
Quick Guide 2 Power-On Commissioning
Issue 03 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 51
To Next Page
Loading...
