Figure 2-3 Connect WLAN
● Manually connect to WiFi
a. Tap Manually connect to WiFi.
b. Select the SmartLi WiFi name whose last 20 digits are the same as the
SN.
c. Enter the WiFi password. (The preset WiFi password is Changeme.)
● Scan to connect to WiFi
a. Tap Scan to connect to WiFi.
b. Scan the QR code on the front panel of the battery module.
Figure 2-4 Scanning a QR code
Step 6 Tap Next to access the SmartLi login screen.
SmartLi-ESM-24020P1
Quick Guide 2 Power-On Commissioning
Issue 03 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 52
To Next Page
Loading...
