Huawei SUN2000-36KTL - Page 61

SUN2000-(33KTL-A, 36KTL, 42KTL)
User Manual
5 Connecting Cables
Issue 07 (2018-05-04)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55

The metal contacts supplied with the DC connectors are either cold forming contacts or
stamping forming contacts. Choose the crimping tools that fit the metal contact types. Do
not mix up the tools.

Crimp the metal cold forming contacts using crimping tool H4TC0001 (Amphenol).

Crimp the metal stamping forming contacts using crimping tool H4TC0002 (Amphenol,
recommended), PV-CZM-22100 (Staubli), or PV-CZM-19100 (Staubli). When choosing
PV-CZM-22100 or PV-CZM-19100, do not use the locator. Otherwise metal contacts
would be damaged.
Figure 5-18 Crimping tool (H4TC0002)
(1) Locator
Figure 5-19 Preparing positive and negative connectors (using metal cold forming contacts)
(1) Positive metal contact (cold forming)
(2) Negative metal contact (cold forming)
(3) Positive connector
(4) Negative connector