Huawei SUN2000-4KTL-L1 User Manual

9 SUN2000 Disposal
9.1 Removing a SUN2000
Procedure
Step 1 Power
o the SUN2000. For details, see 8.1 System Power-O.
Step 2 Disconnect all cables from the SUN2000, including signal cables, DC input power
cables, battery cables, AC output power cables, and PE cables.
Step 3 Remove the WLAN antenna or the Smart Dongle from the SUN2000.
Step 4 Remove the SUN2000 from the mounting bracket.
Step 5 Remove the mounting bracket.
----End
9.2 Packing a SUN2000
● If the original packaging is available, put the SUN2000 inside it and then seal
it using adhesive tape.
● If the original packaging is unavailable, put the SUN2000 inside a suitable
hard carton and seal it properly.
9.3 Disposing a SUN2000
If the SUN2000 service life expires, dispose the SUN2000 according to the local
disposal rules for electrical equipment and electronic component waste.
SUN2000-(2KTL-6KTL)-L1
User Manual 9 SUN2000 Disposal
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 103

Huawei SUN2000-4KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Rated output power	4000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Max. apparent AC power	4000 VA
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	200-1000 V
Number of MPP trackers	2
Max. short-circuit current per MPPT	15 A
Operating temperature range	-25°C to +60°C
Protection degree	IP65
Max. Input Power	6000 W
Max. Output Power	4000 W
Rated Output Voltage	220 V / 230 V / 240 V
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural convection
AC voltage range	180 V to 280 V