Huawei SUN2000-4KTL-L1 User Manual

Figure 7-11 Apparent power control
Table 7-2 Apparent power
Parameter Description Value Range
Maximum apparent
power (kVA)
Species the output
upper threshold for the
maximum apparent
power to adapt to the
capacity requirements of
standard and customized
inverters.
[Maximum active power,
S
max
]
Maximum active power
(kW)
Species the output
upper threshold for the
maximum active power
to adapt to dierent
market requirements.
[0.1, P
max
]
NO TE
The lower threshold for the maximum apparent power is the maximum active power. To
lower the maximum apparent power, lower the maximum active power rst.
7.2.1.3 Battery Control
Prerequisites
The screenshots in this chapter are taken in the SUN2000 3.2.00.011 App. The App
is being updated. The actual screens may vary.
Function
When the inverter connects to a battery, add the battery and set battery
parameters.
SUN2000-(2KTL-6KTL)-L1
User Manual 7 Man-Machine Interaction
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 79

Huawei SUN2000-4KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Rated output power	4000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Max. apparent AC power	4000 VA
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	200-1000 V
Number of MPP trackers	2
Max. short-circuit current per MPPT	15 A
Operating temperature range	-25°C to +60°C
Protection degree	IP65
Max. Input Power	6000 W
Max. Output Power	4000 W
Rated Output Voltage	220 V / 230 V / 240 V
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural convection
AC voltage range	180 V to 280 V