Huawei SUN2000-4KTL-L1 User Manual

(M) FusionSolar App (N) 4G Smart Dongle (O) WLAN-FE Smart
Dongle
(P) Router (Q) FusionSolar Smart
PV Management System
NO TE
For detailed operations on devices in the network, see the following guides:
● SUN2000-450W-P Smart PV Optimizer Quick Guide
● LUNA2000-(5-30)-S0 User Manual
● Backup Box-(B0, B1) Quick Guide
CA UTION
The o-grid load output port of the Backup Box cannot be directly connected to
the power grid. Otherwise, the Backup Box will be shut down due to overload.
Supported Power Grid Types
The SUN2000 supports the following power grid types: TN-S, TN-C, TN-C-S, and
TT. In the TT power grid, the N-to-PE voltage must be less than 30 V.
SUN2000-(2KTL-6KTL)-L1
User Manual 2 Product Introduction
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 16

Huawei SUN2000-4KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Rated output power	4000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Max. apparent AC power	4000 VA
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	200-1000 V
Number of MPP trackers	2
Max. short-circuit current per MPPT	15 A
Operating temperature range	-25°C to +60°C
Protection degree	IP65
Max. Input Power	6000 W
Max. Output Power	4000 W
Rated Output Voltage	220 V / 230 V / 240 V
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural convection
AC voltage range	180 V to 280 V