Huawei SUN2000-4KTL-L1 User Manual

Icon Name Meaning
Delayed discharge ● High voltage exists
after the SUN2000
is powered on. Only
qualied and
trained electrical
technicians are
allowed to perform
operations on the
SUN2000.
● Residual voltage
exists after the
SUN2000 is
powered
o. It
takes 5 minutes for
the SUN2000 to
discharge to the
safe voltage.
Refer to
documentation
Reminds operators to
refer to the documents
delivered the
SUN2000.
Grounding Indicates the position
for connecting the
protective earthing
(PE) cable.
Operation warning Do not remove the
connector or antenna
when the SUN2000 is
running.
Grounding warning Ground the SUN2000
before powering it on.
Serial number (SN) Indicates the SUN2000
SN.
Media access control
(MAC) address
Indicates the MAC
address.
SUN2000-(2KTL-6KTL)-L1
User Manual 2 Product Introduction
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 19

Huawei SUN2000-4KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Rated output power	4000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Max. apparent AC power	4000 VA
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	200-1000 V
Number of MPP trackers	2
Max. short-circuit current per MPPT	15 A
Operating temperature range	-25°C to +60°C
Protection degree	IP65
Max. Input Power	6000 W
Max. Output Power	4000 W
Rated Output Voltage	220 V / 230 V / 240 V
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural convection
AC voltage range	180 V to 280 V