Huawei SUN2000-4KTL-L1 User Manual

● Updated 7.2.1 Energy Control.
● Updated 10.1 SUN2000 Technical Specications.
Issue 05 (2021-08-10)
● Updated 5.7 Connecting DC Input Power Cables.
● Updated 5.8 (Optional) Connecting Battery Cables.
● Updated 5.9 (Optional) Connecting Signal Cables.
● Updated 7.1 App Commissioning.
● Updated 7.2.1.3 Battery Control.
● Updated B Device Commissioning.
● Updated D Rapid Shutdown.
Issue 04 (2021-04-01)
● Updated 5.2 Preparing Cables.
● Updated 6.2 System Power-On.
● Updated 8.3 Troubleshooting.
Issue 03 (2020-09-15)
● Updated 5.3 Connecting PE Cables.
● Updated 8.3 Troubleshooting.
Issue 02 (2020-06-09)
● Updated 4.2 Preparing Tools and Instruments.
● Updated 5.2 Preparing Cables.
● Updated 5.7 Connecting DC Input Power Cables.
● Updated 5.9 (Optional) Connecting Signal Cables.
● Updated 7.1.4 (Optional) Setting the Physical Layout of the Smart PV
Optimizers.
● Updated C Resetting Password.
Issue 01 (2020-04-17)
This issue is the
rst ocial release.
SUN2000-(2KTL-6KTL)-L1
User Manual About This Document
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. iv

Huawei SUN2000-4KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Rated output power	4000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Max. apparent AC power	4000 VA
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	200-1000 V
Number of MPP trackers	2
Max. short-circuit current per MPPT	15 A
Operating temperature range	-25°C to +60°C
Protection degree	IP65
Max. Input Power	6000 W
Max. Output Power	4000 W
Rated Output Voltage	220 V / 230 V / 240 V
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural convection
AC voltage range	180 V to 280 V