SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
10 Technical Specifications
Copyright © Huawei Technologies Co., Ltd.
Note a: When the SUN2000 is disconnected from the grid and stops working, the built-in
PID can achieve the PV– positive offset of the PV module. (PV– positive offset refers to
raising the voltage between PV– and the ground to above 0 V through voltage
compensation.) When designing a power plant, confirm with the PV module manufacturer
that the anti-PID voltage compensation direction of the PV module is the same as the
direction of the PV– positive offset. Otherwise, PV modules may be damaged.
For the SUN2000 that supports built-in PID repair, when Built-in PID running mode is set
to Repair, there is repair voltage between PV modules and the ground at night. If you need to
maintain PV modules at night, power off the SUN2000 to avoid electric shocks.
Display and Communication
LED, Bluetooth module+app, USB data cable+app
Communicati
on networking
mode
Common Parameters
1075 mm x 555 mm x 300 mm
Highest
operating
altitude
To Next Page
Loading...
