SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
Copyright © Huawei Technologies Co., Ltd.
Step 2 Open the maintenance compartment door and keep it open with the support bar.
Figure 5-5 Keeping the door open with a support bar
Step 3 Remove the cover and hang it on the hook of the door.
Figure 5-6 Removing a cover
----End
5.4 Installing the AC Output Power Cable
Precautions
A three-phase AC switch needs to be configured outside the AC side of the SUN2000. To
ensure that the SUN2000 can safely disconnect from the power grid under abnormal
conditions, select an appropriate overcurrent protection device according to local power
distribution regulations.
Recommended Overcurrent Protection
Device Specifications
To Next Page
Loading...
