Huawei SUN2000-50KTL-JPM0 - 5.3 Maintenance Compartment Door

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
5 Electrical Connections
Issue 01 (2018-09-30)
Copyright © Huawei Technologies Co., Ltd.
33

Pay attention not to damage the core wire when stripping a cable.

The cavity formed after the conductor crimp strip of the OT terminal is crimped must wrap
the core wires completely. The core wires must contact the OT terminal closely.

Wrap the wire crimping area with heat shrink tubing or PVC insulation tape. The
following figure uses heat shrink tubing as an example.

When using the heat gun, protect devices from being scorched.
Figure 5-2 Crimping the OT Terminal
(1) Cable
(2) Core wire
(3) Heat shrink tubing
(4) OT terminal
(5) Hydraulic pliers
(6) Heat gun
5.3 Opening the Maintenance Compartment Door
Precautions