Huawei SUN2000-50KTL-JPM0 - Installation Position Requirements

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
4 Installation
Issue 01 (2018-09-30)
Copyright © Huawei Technologies Co., Ltd.
17
Type
Tool
Heat gun
Cable tie
N/A
N/A
PPE
Safety gloves
Safety goggles
Anti-dust respirator
Safety shoes
4.3 Determining the Installation Position
4.3.1 Environment Requirements
Basic Requirements

The SUN2000 can be installed indoors or outdoors.

Do not install the SUN2000 in a place where personnel are easy to come into contact
with its enclosure and heat sinks, because these parts are extremely hot during operation.

Do not install the SUN2000 in areas with flammable or explosive materials.

Do not install the SUN2000 at a place within children's reach.

Do not install the SUN2000 outdoors in salt areas because it will be corroded there and
may cause fire. A salt area refers to the region within 500 meters from the coast or prone
to sea breeze. The regions prone to sea breeze vary depending on weather conditions
(such as typhoons and monsoons) or terrains (such as dams and hills).

The SUN2000 must be installed in a well-ventilated environment to ensure good heat
dissipation.

Recommended: Install the SUN2000 in a sheltered place or a place with an awning.
Mounting Structure Requirements

The mounting structure where the SUN2000 is installed must be fireproof.