Type Tools and Instruments
Steel measuring tape Level Multimeter
Cable tie Heat shrink tubing Vacuum cleaner
Person
al
protec
tive
equip
ment
(PPE)
Goggles Work shoes Dust mask
Protective gloves
- -
4.3 Selecting an Installation Position
Basic Requirements
● The SUN2000 is IP66-rated and can be installed indoors or outdoors.
● Do not install the SUN2000 in a place where a person can easily be exposed
to its enclosure and heat sinks, because these parts are extremely hot during
operation.
● Do not install the SUN2000 in areas with
ammable or explosive materials.
● Do not install the equipment in an area with strong vibration, noise, or
electromagnetic interference.
● If inverters are installed in a place with abundant vegetation, in addition to
routine weeding, harden the ground underneath the inverters using cement or
gravel (recommended area: 3 m x 2.5 m).
SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual 4 Installation
Issue 05 (2023-02-28) Copyright © Huawei Technologies Co., Ltd. 23
To Next Page
Loading...
