Type Tool
Measuring tape Digital or bubble
level
Hydraulic pliers Heat shrink tubing
Heat gun Cable tie
N/A N/A
PPE
Safety gloves Safety goggles Anti-dust respirator Safety shoes
UTXTC0005 is used to crimp metal cold forming contacts, while H4TC0003 is used to crimp
metal stamping forming contacts.
4.3 Determining the Installation Position
4.3.1 Environment Requirements
Basic Requirements
● Do not install the inverter in working or living areas.
● If the device is installed in public places (such as parking lots, stations, and
factories) other than working and living areas, install a protective net outside
the device, set up a safety warning sign to isolate the device, and prevent
unauthorized personnel from approaching the inverter. This is to avoid
personal injury or property loss caused by accidental contact or other reasons
during device operation.
● Do not install the inverter in areas with
ammable materials.
● Do not install the inverter in areas with explosive materials.
SUN2000-(70KTL, 75KTL)-C1
User Manual 4 Installation
Issue 09 (2020-10-12) Copyright © Huawei Technologies Co., Ltd. 21
To Next Page
Loading...
Need help?
General