Huawei SUN2000 Series - Downloading and Installing the App

Figure 7-1 Connection over a WLAN module or a Bluetooth module
(A) SUN2000 (B) WLAN module or
Bluetooth module
(C) Mobile phone
Figure 7-2 Connection over a USB data cable
(A) SUN2000
(B) USB data cable (C) Mobile phone
Disclaimer
NO TICE
● The congurable parameters of the SUN2000 vary with the device model and
grid code.
● If you change the grid code, some parameters may be restored to factory
defaults. After the grid code is changed, check whether the previously set
parameters are
aected.
● Delivering a reset, factory reset, shutdown, or upgrade command to the solar
inverters may cause power grid connection failure, which
aects the energy
yield.
● Only professionals are allowed to set the grid parameters, protection
parameters, feature parameters, and power adjustment parameters of the solar
inverters. If the grid parameters, protection parameters, and feature parameters
are incorrectly set, the solar inverters may not connect to the power grid. If the
power adjustment parameters are incorrectly set, the solar inverters may not
connect to the power grid as required. In these cases, the energy yield will be
aected.
● The parameter names, value ranges, and default values are subject to change.
7.1.2 Downloading and Installing the App
● FusionSolar app: Scan the QR code and download the latest installation
package.
SUN2000-(100KTL, 110KTL, 115KTL)-M2
User Manual 7 Man-Machine Interactions
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 64