Figure 8-9 IRC of the server
----End
Ubuntu
Supported OSs: Ubuntu 14.04 LTS and Ubuntu 16.04 LTS
Step 1
Congure an IP address for the client (PC) to enable communication between the
client and the iBMC.
The IP address
congured and the iBMC management network port IP address
must be on the same network segment.
Step 2 Open the console and set the folder where the IRC is stored as the working folder.
Step 3 Run the chmod 777 KVM.sh command to set the permission for the IRC.
Step 4 Run ./KVM.sh to start the IRC.
A dialog box similar to the one shown in Figure 8-10 is displayed.
TaiShan 200 Server
User Guide (Model 2280) 8 Common Operations
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 102
To Next Page
Loading...
