Huawei TaiShan 200 Series - 8.3 Logging In to the Server over a Serial Port Using PuTTY

● Parity: None
● Stop bits: 1
● Flow control: None
Figure 8-16 shows the port settings.
Figure 8-16 HyperTerminal Properties
Step 4 Enter the user name and password to access the CLI.
----End
8.3 Logging In to the Server over a Serial Port Using
PuTTY
Use PuTTY to log in to the server over a serial port in any of the following
scenarios:
● The server is
congured for the rst time at a site.
● A remote connection to the server cannot be established.
● Visit the chiark website and download the PuTTY software from the homepage.
● PuTTY of an earlier version may cause server login failures. You are advised to use
PuTTY of the latest version.
TaiShan 200 Server
User Guide (Model 2280) 8 Common Operations
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 109