UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Check that all fittings comply with the packing list. If some fittings are missing or do not
comply with the packing list, record this information and contact your local Huawei
office immediately.
Step 7 Remove the L-shaped bracket that secures the cabinet and the pallet, and secure the sliding
plate to the pallet by using the two M12 screws that were removed, as shown in Figure 3-6.
Figure 3-6 Removing the L-shaped bracket
Tighten the two screws in step 2 in Figure 3-6. Otherwise, the slide plate may move when the UPS is
removed.
10 screws need to be removed from each L-shaped bracket on the UPS5000-E-200K-FM.
Step 8 Raise the four anchor bolts to the highest position using an adjustable wrench, as shown in
Figure 3-7.
To Next Page
Loading...
