UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-64 Removing small covers from the bottom of the cabinet
Drill holes into the large cover for routing cables.
a. Remove all small covers from the bottom of the cabinet.
b. Remove the two large covers from the rear bottom of the cabinet, drill holes into
them, and install them to the positions where the small covers were placed, as
shown in Figure 3-65.
To Next Page
Loading...
