Huawei UPS5000-E-300K-SMT - Routing Cables (UPS5000-E-200 K-FM); Routing Cables from the Top

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
3 Installation
Issue 02 (2017-02-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
83
Figure 3-43 Connecting signal cables
The number and colors of signal cables in Figure 3-43 are for reference only.
----End
3.2.6 Routing Cables (UPS5000-E-200K-FM)
3.2.6.1 Routing Cables from the Top
Context

Route cables for the UPS from inside out and from bottom up.

After routing cables, use firestop putty to fill in the gap between the cables and the cabinet.
Procedure
Step 1 Open the front door and remove the cover from the power distribution subrack, as shown in
Figure 3-44. Figure 3-45 shows the positions of copper bars.