UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-76 Top cabling
For details about how to connect the battery neutral wire, see Figure 3-36 in 3.2.5.1 Routing Cables from
the Top.
Single mains
For single mains, the copper bar between the mains and bypass input terminals do not
need to be removed, and bypass input cables do not need to be connected.
Step 5 Route signal cables. Bind cables to the cabinet. Figure 3-77 shows the signal cables routed
from the top of the cabinet.
To Next Page
Loading...
