UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output active power of each phase on the
UPS.
Output apparent power of each phase on the
UPS.
Output reactive power of each phase on the
UPS, that is, square root of the difference
between the square of output apparent
power and the square of output active
power.
Load ratio of each phase on the UPS, that is,
proportion of actual power to rated power.
Proportion of the peak value of load current
to the valid value.
Mains Input
Figure 4-12 Mains Input screen
Mains input phase voltage
Mains input phase current
Proportion of the mains input active power
to the mains input apparent power.
To Next Page
Loading...
