Huawei UPS5000-E-300K-SMT - Page 143

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
4 User Interface
Issue 02 (2017-02-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134
Item
Description
Battery
Status
The value can be Not connected, Equalized charging, Float charging,
Hibernating, discharging, or Not chg. or dis.
Voltage
(V)
Voltage of the battery string.
Current
(A)
Current of the battery string (the current is + when batteries are being
charged and - when discharged).
Temperatu
re (°C)
Battery operating temperature (A battery sensor is required. If the sensor is
not installed, NA is displayed).
Backup
time (min)
Battery backup time estimated at the current load.
Remaining
cap. (%)
Remaining battery capacity.
SOH
State of health.
Total Runtime
Figure 4-15 Total Runtime screen
Item
Description
Bypass runtime (h)
Time for which the UPS runs in bypass
mode.
Inv. runtime (h)
Time for which the UPS runs in inverter
mode.
The value must be an integer. For example: