UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-44 Clearing faults
Step 3 Check that the EPO alarm is cleared by viewing active alarms. If the system bypass input is
normal, the UPS transfers to bypass mode.
Viewing active alarms on the LCD
Choose System Info > Alarms and tap Active Alarms to check that the EPO alarm is
cleared.
Figure 5-45 Active alarms
Viewing active alarms on the WebUI
In a web browser, enter the UPS IP address and select a display language. Enter a user
name and password, and click Login to open the homepage. Choose Monitoring >
Active Alarms to check that the EPO alarm is cleared. If the bypass input is normal, the
UPS transfers to bypass mode.
To Next Page
Loading...
