Huawei UPS5000-E-300K-SMT - Page 49

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
2 Overview
Issue 02 (2017-02-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40
Compone
nt
Model
Function
battery status data from the downstream BIM
groups through wireless communication, and
sends the data to the ECC and the third-party
network management system (NMS) through
COM or PoE ports. For details, see the
document delivered with the iBAT.
Parallel
cable
5 m/10 m/15 m
Connects UPSs in parallel.
BSC cable
5 m/10 m/15 m/60 m
Transmits bus synchronization signals in a
dual-bus system.
Top
air-flow
cabinet
N/A
Used to ensure heat dissipation and allows the
UPS to be installed against a wall.

The ECM extended subrack does not support onsite installation. If you require this optional
component, inform Huawei when you purchase the UPS. Huawei installs it before delivery.

Antiseismic kits cannot be configured for the UPS5000-E-200K-FM.

IP21 cannot be configured for the UPS5000-E-300K-SMT and UPS5000-E-200K-FM. If cables are
routed in and out from the top for the UPS5000-E-200K-SM, IP21 cannot be configured.