UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-17 Securing the antiseismic kits to the cabinet (with a marking-off template)
(Without a marking-off template) use eight M6x20 and four M12 screws.
Figure 3-18 Securing the antiseismic kits to the cabinet (without a marking-off template)
Step 4 Reinstall the rear panel.
Step 5 Adjust the cabinet position so that the expansion bolt holes are aligned with the eight holes at
the bottom of the cabinet.
Step 6 Secure antiseismic kits to the floor at both the front and rear of the cabinet by using eight M12
expansion bolts. The positioning is shown in Figure 3-19.
To Next Page
Loading...
