UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-30 Copper bar positions
(1) Battery input terminals (+,
N, –)
(2) Mains input terminals
(1L1–1L3, N)
(3) Maintenance bypass
switch
(4) Bypass input terminals
(2L1–2L3, N)
(5) Output terminals (U, V,
W, and N)
Step 2 Determine the cabling mode.
Remove small covers or drill holes on the large cover to route cables based on site conditions.
Remove the cable cover from the top of the cabinet for cable routing.
Remove the small covers from the top of the cabinet, as shown in Figure 3-31.
To Next Page
Loading...
