Accessing the Internet via Bluetooth
When your watch is connected to your phone over the Huawei Health app and the app is
running in the background, your watch will use your phone's current network (mobile data or
WLAN) by default.
Accessing the Internet via WLAN
When your watch is connected to the Internet via WLAN, you can make MeeTime calls
directly on your watch when you don't have your phone nearby.
1 Press the Up button on your watch to open the app list, go to Settings > WLAN and turn
on the WLAN switch. Your watch will then automatically scan for available WLANs.
2 Touch the WLAN you want to connect to, enter the password, and touch Connect.
The watch only supports 2.4 GHz WLANs.
Accessing the Internet via an eSIM
To use this feature, you'll need to enable the eSIM service rst.
Press the Up button to enter the app list, go to Settings > Mobile network > Mobile data,
and toggle on Mobile data.
Ignoring the connected WLAN
1 Press the Up button to open the app list, and then go to Settings > WLAN.
2 Select the connected WLAN and touch Forget.
Airplane mode
Enable Airplane mode before a ight, to have your watch turn o Bluetooth, WLAN, and
cellular data.
You can enable or disable Airplane mode using either of the following methods:
• Swipe down from the top of the home screen to open the shortcut menu, and touch
Airplane mode to enable or disable it.
• Press the Up button to open the app list, go to Settings > Mobile network and toggle
Airplane mode on or o.
Getting Started
10
To Next Page
Loading...
