Sounds & vibration
Setting the ring volume
1 Enter the app list, and go to Settings > Sounds & vibration > Ring volume.
2 Swipe up or down to adjust the ring volume.
Setting the ringtone
1 Press the Up button to enter the app list, and go to Settings > Sounds & vibration >
Ringtone.
2 Swipe up or down to select a ringtone.
Ringtones can't be customized.
Muting and unmuting
1 Enter the app list, and go to Settings > Sounds & vibration.
2 Enable or disable Mute.
Crown haptics
1 Press the Up button to enter the app list, and go to Settings > Sounds & vibration.
2 Enable Crown haptics, and you will feel the haptic feedback at each turn of the watch
crown. You can also disable the feature to suit your needs
Updates
On your watch
Before updating, make sure that your watch is connected to a 2.4 GHz WLAN or cellular
network.
1 Press the Up button to enter the app list, and go to Settings > System & updates >
Software updates.
2 Touch Check for updates and follow the onscreen instructions to complete the update.
On your phone
This operation is not supported on iPhones.
Open the Huawei Health app, navigate to the device details screen, and touch Firmware
update. Your phone will check for any available updates. Then follow the onscreen
instructions to update your watch.
More
49
To Next Page