Adding and deleting third-party components
Third-party components automatically display in the component library after the download
and installation of third-party apps and watch faces, even after a certain third-party watch
face is removed from the wearable end. To completely remove a third-party component,
open the Huawei Health app, navigate to the device details screen, go to Watch faces >
More > Mine, and touch the Delete icon in the lower right corner to delete the
corresponding watch face and all of its components.
Do Not Disturb mode
When Do Not Disturb mode is enabled, your device won't ring or vibrate when receiving
incoming calls and notications (except when an alarm goes o).
Enabling/Disabling Do Not Disturb
Method 1: Swipe down from the top of the watch home screen and touch Do Not Disturb to
enable or disable it.
Method 2: Go to Settings > Sounds & vibration > Do Not Disturb > All day to complete
the setting.
Scheduling Do Not Disturb
To use this feature, update your wearable device and the Huawei Health app to their
latest versions.
• Go to Settings > Sounds & vibration > Do Not Disturb > Scheduled, touch Add time, and
set Start, End, and Repeat. You can add multiple time periods and put any of them into
eect.
• To disable any scheduled Do Not Disturb periods, go to Settings > Sounds & vibration >
Do Not Disturb > Scheduled.
Finding your phone using your watch
1 Swipe down on the watch face screen to open the shortcut menu. Check to make sure
that is displayed, indicating that your watch is properly connected to your phone via
Bluetooth.
2 Look for your phone following the ringtone played on your phone (even in Vibration or
Silent mode), as long as your watch and phone are within the Bluetooth connection
range.
3 Touch the wearable device screen to end the search.
Assistant
24
To Next Page
Loading...
