wearable device is used in an
unsuitable scenario.)
IP68 Products that meet this standard
can prevent dust from entering
and can be immersed in water
deeper than 1 meter at normal
temperature and atmospheric
pressure for a short period of
time (the immersion depth and
duration may vary depending on
the product model). This water
resistance level is a higher
standard than IPX7.
The wearable device complies with the
IP68-rated resistance level under the
IEC 60529:2013 standard.
The wearable device can prevent dust
from entering in living rooms, oces,
laboratories, light industrial studios,
and storage rooms. The device is not
suitable for use in particularly dusty
environments.
The device can withstand immersion in
water for a short period of time.
However, it is not recommended that
you immerse the device in water. You
can wear the device during exercise as
it is resistant to sweat, when washing
your hands, and on rainy days.
The wearable device is not suitable for
use in the following scenarios:
1. Scuba diving or other activities with
immersion in water for a long time.
2. Showers, hot springs, saunas (steam
rooms), and other activities in high-
temperature and high-humidity
environments.
3. Activities involving fast-owing
water, such as platform diving,
jumping into water, water skiing,
surng, motorized water sports (such
as speedboats and motorboats), car
washing, and rafting.
(Damage to the wearable device
caused by immersion in liquid is not
covered by the warranty if the
wearable device is used in an
unsuitable scenario.)
Dust and water resistance is not permanent, and performance may deteriorate with daily
wear and tear. The following usage conditions may aect the water-resistance performance
More
52
To Next Page
Loading...
