Hubner FG 40 Series User Manual (English)

To Next Page

English

Translation of the original Operating and Assembly Instructions FG40_MANUAL-en_R12(2018-10-31)ID74490.doc

ID 74490

Operating and Assembly Instructions

Incremental Encoder FG 40

Read the Operating and Assembly Instructions prior to

assembly, starting installation and handling!

Keep for future reference!

Table of Contents3
General5
Information about the Operating and Assembly Instructions5
Scope of Delivery5
Explanation of Symbols5
Disclaimer6
Copyright6
Guarantee Terms6
Customer Service6
Safety6
Responsibility of the Owner6
Intended Use6
Improper Use7
Personnel7
Personal Protective Equipment7
Special Dangers7
Electrical Current7
Rotating Shafts / Hot Surfaces7
Safeguarding against Restart7
Technical Data8
Type Plates8
Electrical and Mechanical Data9
For Pulse Rates (Square Wave Pulses)9
Output Signals Sine / Cosine10
Type Code14
For Pulse Rates (Square Wave Pulses)14
For Output Signals Sine / Cosine15
Transport, Packaging and Storage16
Safety Instructions for Transport16
Incoming Goods Inspection16
Packaging / Disposal16
Storage of Packages (Devices)16
Mounting and Commissioning17
Safety Instructions17
Technical Information17
Required Tools17
Mounting Preparations18
Mounting B5 Type (Flange) Incremental Encoders18
Mounting B35 Type (Flange and Foot) Incremental Encoders20
Mounting Tolerances for Construction Type B5 and B3521
Attaching Additional Devices22
Electrical Connection and Start up24
Preparing Cables24
Electrical Connection24
Dismantling26
Safety Instructions26
Dismantling the Encoder26
Faults27
Faults Table27
Inspections28
Safety Instructions28
Maintenance Information28
Inspection Schedule28
Disposal28
Disposal Procedure28
Replacement Parts28
Dimension Drawings29
Construction Type B5 (Flange)29
Construction Type B35 (Flange and Foot)31
Construction Type B5/B14 (Flange with 2 Shaft Ends)33
Construction Type B35/B14 (Flange and Foot with 2 Shaft Ends)35
Mounting Options37
Additional Dimension Drawings - Electrical Socket Design39
Incremental Encoder FG40
Connection Diagrams42

Need help?

Do you have a question about the Hubner FG 40 Series and is the answer not in the manual?

Hubner FG 40 Series Specifications

General

Model	FG 40 Series
Humidity	5% to 95% non-condensing
Type	Media Converter
Interface	Fiber Optic
Connector Type	SC/ST

Related product manuals

Hubner AMSH 40 K-1312

28 pages

Hubner FG 40-1024G-90G-NG-S

Hubner FG 40 Series User Manual

Table of Contents

Hubner FG 40 Series Specifications

Related product manuals