9.15.6 Distance Units
Use the arrows to cycle through the 2 options and press Confirm to make your selection. The
Distance settings are as follows:
Kilometers and meters
Miles and feet (default value)
Miles and yards
9.15.7 Haptic Feedback
Haptic feedback on the Trek is a system through which vibrations are used to guide you to your
destination.
Use the arrows to turn the Haptic Feedback on or off. Confirm your selection by pressing the
Confirm button.
9.15.8 About
Use the Arrows to browse through the following information:
Device name and version
Map coverage name and version
Device serial number
Press Confirm to exit the information. The system will announce current state.
9.15.9 Resetting GPS Position
Occasionally, the Trek will not be able to properly situate the user. For example, this may happen
in an environment surrounded by high buildings or dense trees. In situations such as these, it can
be useful to reset your position by selecting this option.
To Next Page
Loading...