97
Navigation X-Press Menu
Cancel Navigation
(only when Navigating)
Settings: Press the RIGHT Cursor key and follow screen instructions.
Cancel Navigation discards the current route and exits Navigation Mode. This menu option will
only appear when you are currently navigating a route. This will not delete a previously-saved
route.
Cancel MOB Navigation
(only when MOB Navigation is activated)
Settings: Press the RIGHT Cursor key and follow screen instructions.
Cancel MOB Navigation removes the Man Overboard (MOB) wa ypoint and exits Man Overboard
mode. This menu option will only appear when you are currently navigating in Man Overboard
mode.
Skip Next Waypoint
(only when Navigating)
Settings: Press the RIGHT Cursor key and follow screen instructions.
Skip Next W aypoint removes the next waypoint from the current route. T his menu option will only
appear when you are currently navigating a route.
Active Side
(Combo Views only)
Settings: Left, Right; Default = Left
Active Side allows you to select a side of the screen in a Combo View. After you choose an active
side, you can apply menu settings and key commands to the view you’ve selected. The Active Side
menu option is only available when a Combo View is on the screen (see Vie ws: Combo Vie ws).
• A green arrow on the Combo View points to the active side.
• When a menu is displayed in the active side, the non-active side of the screen will be
grayed out.
Split Position
(Combo Views only)
Settings: Left, 30, 40, 50, 60, 70, Right; Default = Various
Split Position sets the size of the left side of the Combo View. Each Combo View can be set
individually. The Split Position menu option is only available when a Combo Vie w is on the screen
(see Views: Combo Views).
• The number setting indicates the percentage taken up by the left side of the Combo View.
• Selecting Left sets the left side of the screen to its smallest setting.
To Next Page
Loading...
Need help?
General
