Navigation Menu Tab
124
Course Projection Line
Settings: Hidden, Standard, Single Vector, COG/SOG; Default = Standard
Course Projection Line displays an arrow or line, extending from the bow o f the boat, that
projects your current course and shows where the boat will go if you continue on your present
course.
You can choose the style of the Course Projection Line as follows:
• Standard = arrow
• Single Vector = line
• COG/SOG = line with tick marks at set intervals from the boat. The tick marks are based
on the speed calculation.
3D View Outline
Settings: Hidden, Visible; Default = Visible
3D View Outline allows you to display or hide an outline on the Chart side of the Chart or Bird's
Eye Combo Views that shows what you're viewing on the Bird's Eye side of the view.
Continuous Navigation Mode
Settings: Off, On; Default = Off
Continuous Navigation Mode allows you to continue to navigate and fish around a particular
waypoint, even if you pass over it multiple times.
GPS Receiver Override
(Advanced)
Settings: Internal, External, Auto; Default = Auto
GPS Receiver Override allows you to set which GPS receiver to use if you have multiple GPS
receiver s plugged into the system. These multiple GPS receivers may be internal or external. If you
select Auto, your unit will select a GPS receiver automatically.
NO TE: If only one GPS receiver is plugged into your system, then Auto will be the only option shown.
To Next Page
Loading...
Need help?
General
