32Maintenance
Transducer Maintenance
Use the following information to maintain the transducer operation.
• If your boat remains in the water for long periods of time, algae and other
marine growth can reduce the e ectiveness of the transducer. Periodically
clean the face of the transducer with a cloth dampened with fresh water.
• If your boat remains out of the water for a long period of time, it may take
some time to wet the transducer when it is returned to the water. Small air
bubbles can climb to the surface of the transducer and interfere with proper
operation. These bubbles dissipate with time, or you can wipe the face of the
transducer with your fi ngers after the transducer is in the water.
MEGA Live 2 Maintenance
Use the following information to maintain the installation of the MEGA Live 2
Transducer.
• Check the stability of the trolling motor mount after initial use and periodically
thereafter to ensure that the installation remains stable.
• If your boat will be in long-term storage, remove the MEGA Live 2 transducer
and store it in –40°F to 158°F (–40°C to 70°C), dry conditions.
To Next Page
Loading...
