Humminbird MEGA LIVE 2 - Update Software; Check the Current Software Version; Update Fish Finder Software with an SD Card

3 Update Software
Update Software
Your fi sh fi nder model may need a software update to work with the MEGA Live 2
transducer. We recommend that you read the following section completely before
starting any software updates.
NOTE
It is important to install the latest software update on your fi sh fi nder to enable all MEGA
Live 2 features. For the latest software update, visit our Web site at humminbird.
johnsonoutdoors.com.
Check the Current Software Version
It is helpful to review the software version number that is currently installed on the
fi sh fi nder and each accessory.
1. Press the HOME key.
2. Select Settings.
3. Select System > Network Info.
4. The Network Info dialog box shows a section for each device connected to the
network. Scroll to each section to note the software version number listed.
Update Fish Finder Software with an SD Card
You will need an SD or microSD card (depending on your fi sh fi nder model).
CAUTION
Humminbird is not responsible for the loss of data fi les (waypoints, routes, tracks, groups,
snapshots, recordings, etc.) that may occur due to direct or indirect damage to the unit’s
hardware or software.
1. Install a formatted SD or microSD card into the computer card slot.
2. Go to humminbird.johnsonoutdoors.com, and click Support > Software Updates.
3. Click on your fi sh fi nder model. The available software updates are listed as
downloads under each product. Confi rm the fi le name is for your fi sh fi nder model.
• Read the notices and instructions, and select Download.
• Follow the on-screen prompts to save the software fi le to the SD or microSD card.