Humminbird ONIX Opeartion Manual

124
Change the Mosaic Display Position
The Mosaic will be displayed on-screen based on the Map Position setting. While you are recording a Mosaic, the Map Position
should be set to Auto.
1. From the Map Options menu, select Map Position.
2
. Select Fixed or Auto.
Auto: Data Displayed Closest to Boat Position
data outside the
display distance can
be shown using the
cursor position
boat icon
Fixed
The Mosaic is locked into the current position when Fixed is selected. The Mosaic will stay
fixed until you change the Map Position setting to Auto.
Auto
The Mosaic will move with the boat icon on-screen. If the cursor is active, the Mosaic data
closest to the cursor position will be displayed.
Mosaic

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal