144
Start Navigation
There are a variety of ways to start navigation in the Radar View. The basic instructions are shown here. See Introduction to
Navigation for more features and information.
Start Quick Route Navigation
Touch Screen
1.
Tap Radar in the status bar.
2. Select Go To.
3. Select Quick Route.
4. Tap the chart in the positions where you want to mark
a route point.
Undo Last Route Point: Tap the Back icon.
Cancel Route Creation: Tap the X icon.
5. To start navigation, tap the check icon in the status bar.
Keypad
1. Press the GO TO key.
2. Select Quick Route.
3. Use the Joystick to move the cursor to a position or
waypoint. Press the Joystick to mark the first route
point.
4. Repeat Step 3 to connect more than one route point.
Undo Last Route Point: Press the EXIT key once.
Cancel Route Creation: Press and hold the EXIT key.
5. To start navigation, press the ENTER key.
Radar & Navigation
To Next Page
Loading...
