HC 6: (05 Serial #) 3.32
HC 12: (05 Serial #) 3.32
PROHC 4.05
HPC 4.05
HCC 4.07
X2 0.39
WAND 4.10
Programming controller with no wifi (e.g; new construction)
In some cases, it may not be convenient to program the controller using the offline mode
feature (programming using controller screen). The following steps must be taken if
programming the controller through the app with a hotspot.
1. Create Hotspot with Smartphone: Depending on your smartphone, please use either
guide below:
Apple hotspot [15]
Android hotspot [16]
2. Once you activate your hotspot, connect the controller to verify the Wi-Fi on the
controller is working properly.
3. Disable WIFI completely. Settings > Offline Settings > Disable Wifi
4. Remove hotspot and programming will remain in the controller.
(Australian Region Only): The hotspot provided by Telstra 4GX dongle is compatible with
Hydrawise controllers in this region. These models are manufactured by Huawei. See the
chart below for supported versions.
Brand Name Model: Supported/Not Supported
Telstra 4GX Wi-Fi MF910Z Supported
Telstra 4GX Broadband USB & Wi-
Fi Plus
E8372 Supported
Telstra Wi-Fi Pro Modem MF910 Not Supported
To Next Page
Loading...
