!
Page 14
RC-024 Version 2.01
Configuring the Master Valve
If your irrigation system has a master valve then configure it here. For more details on what a master valve
is see Configuring a Master Valve.
Adding Zones
Now you can add the zones for the various parts of your garden. For more detail on how to add zones, see
Adding a Zone.
Setting Program Start Times
The last step in configuring your controller is to set up your Program Start Times. These will tell your
controller when it’s allowed to water. You can set specific days of the week or use odd/even watering days.
You can also set the time of day and then link the program start times to particular zones and schedules.
To Next Page
Loading...
