14
Easily Installs on Any Automatic
Irrigation System…
Simple to add on to an existing or new installation
The Mini-Clik
®
is versatile enough to work with all
popular irrigation controllers. The Mini-Clik is available
in two versions. One is wired for “normally closed” sen-
sor terminals and the other is wired for “normally open”
sensor terminals. Each unit will have two wires attached
to it, connected to a 25-foot extension.
Available in 24 Volt and 110/220 Volt
UL Listed Models…
Four different models to accommodate your
particular wiring needs
Mini-Clik – The standard
“normally closed” Mini-Clik
model for use on most 24 Volt
applications.
Mini-Clik-NO – The standard
“normally open” Mini-Clik
model for use on most 24 Volt
applications.
Mini-Clik-C – Features a
½" female threaded inlet at
the bottom to accommodate
conduit.
Mini-Clik-HV – The C model
with added code approved liq-
uid-tight electrical fittings for
110/220 Volt wiring applica-
tions and systems using pumps
drawing less than 10 amps
peak. Also includes 18 inches
of 16 AWG wire. Ready to
mount on any standard junc-
tion box.
Constructed of High Impact Thermoplastic…
Dependable operation built to last
The Mini-Clik is constructed of heavy-duty materials
including a thermoplastic that can withstand all ex-
tremes of weather from direct scorching sun to freezing
ice storms.
Maintenance-Free Patented
Sensing Mechanism…
No callbacks, set it and forget it
Unlike other rain sensors that use collection cups, the
Mini-Clik does not collect debris, so it does not require
cleaning. And, for those in cold climates, the Mini-Clik
does not have to be removed or covered for “winteriz-
ing” purposes. This means no required maintenance for
the unit and no callbacks to clean it.
The sensing mechanism is in-
genious but simple. Discs absorb
water and then expand propor-
tionally to the amount of rainfall
that fell (e.g., a small cloudburst
would result in little absorption,
a thunderstorm with 2" of rainfall would lead to more
absorption and thus more expansion). As the moisture-
laden discs expand, they eventually activate a switch
that interrupts the circuit from the controller to the
valves. As the discs dry out, they contract and release
the switch.
5-Year Warranty…
Hunter Industries backs up its products
A full five-year warranty by Hunter communicates to
our customers that the Mini-Clik is a rain sensor that
stands up to the environment. The end-user can be as-
sured of a quality product with a guarantee of depend-
able operation.
Adjusts to Actuate at Various Rainfall
Quantities…
Versatile and accurate
Depending on local conditions, the
Mini-Clik can keep the irrigation
system from starting or continuing
after rainfall quantities of
1
⁄
8
", ¼", ½",
¾", 1" (3 mm, 6 mm, 13 mm, 19 mm,
25 mm). To adjust it to the desired
shutoff quantity, rotate the cap on
the switch housing so that the pin are
located in the proper slots.
PRODUCT FEATURES AND BENEFITS
To Next Page
Loading...
