HunterDouglas PowerView Quick Start Guide

3.3 "TARGET REMOTE" : Press the reset button
for six seconds.
The group buttons will ash on the press of
the Reset button, then again at six seconds.
3.4 "TARGET REMOTE" : Close the cover.
3.5
"SOURCE REMOTE" : Press  stop for 6
seconds.
Keep pressing until the remote lights start
blinking.
3.6
"TARGET REMOTE" : Press  stop and hold
3.7
"SOURCE REMOTE" : Press  stop and
release
3.8
"TARGET REMOTE" : Release  stop
As conrmation "TARGET REMOTE" will ash
the group buttons.
3.9 "SOURCE REMOTE" : If the buttons are still
ashing Press  stop for 6 seconds.
Keep pressing until the ashing stops.
MANUAL
Page 3 of 14 version: 1.0

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model